SR 130 BRASS BOX IN 4 PARTS ROUNDIt is the standard box in 4 parts for complete prosthesis. Its peculiar shape which reflects the one of the manufact, allows the use of the minimum quantity of plaster, enhancing reduction of consumption and waste.The box is manufactured in moulded brass. SR 131 BRASS IN 4 PARTS REINFORCEDBox in 4 parts reinforced. Its use and structure is similar to that of the SR 130. Its shape is the typical extended octagonal one suitable for big works.    SR 132 SNAP FLASKING BOXThis innovative box enables you to perform along with the usual operations also...

SR 135 BRACKET S1 for 1 muffle     SR 136 BRACKET S2  - per  2  muffles The body in casted aluminum makes this bracket absolutely light and both the central screw and the mother screw are made in brass to improve the life time of the bracket and resist the stresses caused by the polymerization.      SR 138 PRESS BRACKET – for 2 muffles This bracket can be used in the hydraulic press to keep the muffles tight after the pressing. It is entirely made in stainless steel.  

SR 121 - C1X SR 123 - C3X SR 126  - C6X SR 129 - C9X SR 120 - Complete cylinderi SR 100 - Rubber base for cylinders Casting cylinders "Degussa Type". Entirely made in stainless steel with rounded corners void of chippings.  

SR 180 – Propan Gas and LPG SR 181 – City Gas Methane The Bunsen features a safety electro-valve which prevents gas from coming out when the flame is off. On turning On the Bunsen you must press the thermo-valve and keep it pressed for about 15 seconds. The flame can be adjusted by rotating the regulating knob or the metallic bush which adjust the amount of air.